Option M1: Pre-wired for 120VAC input. By adjusting an internal jumper, the supply can be easily rewired to accept 240VAC input. Please note that the power cord shown in the photo is not included.
Option M9C: GPIB Interface
Please see the product manual (available on the manufacturer's web page) for details.
Manufacturer's Description:
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies incorporate current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits.
This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
- Regulation (Line or Load)
Voltage: 0.1%
Current: 0.1% - Transient Response:
Typically recovers in <1 ms to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change. 500 ?s typical - Stability:
?0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature - Meter Accuracy: 1% of full scale + 1 count
- Dimensions:
1.75" (44 mm) H x 19" (482 mm) W x 17.5" (444 mm) D - Weight
19 lbs. ( 8.62 kg)
