|
100kV 0.74uF Energy Discharge Capacitors, 3,700 Joules
$195.00
Energy Discharge Capacitors, manufactured by Aerovox, part # PX480D60. Rated at 100kV 0.74uF, 3,700 Joules. Previously used in a Marx Generator at a major research institution. Castor oil impregnant. These capacitors are in fair physical condition, with a few surface scratches and some rusting along the length of each capacitor due to prior storage outdoors under tarps. Click on the product image to the left for a more detailed picture of one of these units. Approximate dimensions: 11" x 14" x 25". To view a product information sheet (PDF), click here. These capacitors weigh about 225lbs each, not including crating, and must be shipped via freight carrier. Before ordering, please email or call us for a freight quote (if you purchase online, we will need to bill you separately for the freight and crating costs). You may also arrange for pickup with your own freight carrier (please contact us to schedule). No returns accepted for this item.
|
|
|
17L9PH - Pulse Capacitor - 50kVDC 0.043uF (General Electric)
$175.00
General Electric pulse capacitor model 17L 9PH. Used. Rated at 50kVDC, 0.043uF, 180PPS. Impregnant: Dielektrol (non-PCB). Capacitor measures 8"x6"x19", insulator is an additional 7". Weight: 49 lbs. For scale, the tape measure pictured at bottom is set to 12". These capacitors are in fair/good physical condition with some scratches to the paint and labeling - see photos.
|
|
|
33695 - Pulse Capacitor - 45kVDC 0.062uF (Maxwell)
$175.00
Maxwell Technologies pulse capacitor model 33695. Used. Rated at 45kVDC, 0.062uF, 180PPS. Rated peak current: 3.3kA (7.2kA fault). Impregnant: PXE (non-PCB). Capacitor measures 8"x6"x20", insulator is an additional 7". Weight: 56 lbs. For scale, the tape measure pictured at bottom is set to 12". There are 2 different styles of insulators and labels on these capacitors (see photos) - the dimensions are otherwise identical. These capacitors are in fair/good physical condition with some scratches to the paint and labeling - see photos. To view a full specification sheet (PDF), click here.
|
|
|
35kV .03uF High Voltage Pulse Capacitors
Maxwell Technologies (TM) pulse capacitors, part #37667, rated at 35kVDC, .030 uF +/- 10%, ~0.02uH E.S.L. These capacitors were removed from industrial equipment (previously used). Approximate dimensions: 6 x 4.25 x 2.25 inches (15 x 10.5 x 5.5 cm). The terminals are threaded for #10-32 screws (not included). To view a full specification sheet (JPG), click here. Replacement labels have been affixed to some of the capacitors that had their original labels removed.
|
|
|
37065 - Pulse Capacitor - 45kVDC 0.026uF (Maxwell)
$155.00
Maxwell Technologies pulse capacitor model 37065. Used. Rated at 45kVDC, 0.026uF, 180PPS. Rated peak current: 11.8kA (22.5kA fault). Impregnant: PXE (non-PCB). Capacitor measures 8"x6"x16.5", insulator is an additional 7". Weight: 43 lbs. For scale, the tape measure pictured at bottom is set to 12". These capacitors are in fair/good physical condition with some scratches to the paint and labeling - see photos. To view a full specification sheet (PDF), click here.
|
|
|
|
|
|
|
|
|
|
|
C484D8-3FI - Capacitor (ABB)
$189.00
ABB Control Inc. model C484D8-3FI capacitor. Rated for 480VAC 60Hz 3-phase, 8kvar, indoor-type enclosure. New/Surplus.
|
|
|
Electrolytic Capacitors, 400V 3900uF
$14.95
These are recent model capacitors with dates of manufacture ranging from 1999 to 2004. Used. Manufactured by Nippon Chemi-Con. Approximately 2.5 inches in diameter and 5.5 inches long. The terminals are threaded for #10-32 screws (not included). To view a specification sheet (PDF), click here (part number U32D 400LG392M63X130HP). Price is per 1 capacitor (multiple units shown for illustration). WE ARE OUT OF STOCK - PLEASE SEE OUR LISTING FOR SIMILAR CAPACITORS, HERE.
|
|
|
Electrolytic Capacitors, 450V 1800uF, p/n E36D451HPN182MCB7M (Nippon Chemi-con)
Nippon Chemi-con electrolytic capacitors, rated 450VDC (500VDC surge), 1800uF. New/Surplus, manufactured in 2008. Capacitors measure 2" in diameter, 4-3/4" in length. Model number E36D451HPN182MCB7M. Rated maximum temperature is 85C. Terminals require English screw size #10-32 x 3/8" long (included). To view a full PDF specification sheet, click here (listed on page 12).
|
|
|
|
|
|
|
High-Voltage Capacitor, 20kVDC .1uF, LK200-104
$79.00
Plastic Capacitors Inc DC filter capacitor, part # LK 200-104, rated at 20kVDC, .1 uF. Previously used. Approximate dimensions: 4 x 2.5 x 7.5 inches. Additional information is available on the manufacturer's web page at http://www.plasticcapacitors.com/typelk.html
|
|
|
High-Voltage Ceramic Capacitors, 30kV 400pF - used
$9.95
High-voltage ceramic doorknob capacitors, rated at 30kV, 400pF, previously used. Manufactured by Murata, part number DHS4E4F401MHXB. Approximately 1-1/4" diameter and 1-1/4" long. Threaded for #8-32 screws (not included).
|
|
|
|
|
LTI4-4 - 330VAC 80uF Capacitor (ASC)
$12.50
ASC part number LTI4-4 metallized polypropylene capacitors, rated at 330VAC 80uF +/- 10%. New/Surplus. Approximate dimensions (in inches): 2-3/4 Dia x 2-3/8 L. Leads: center lead is 1-3/4 L. Outer lead is 2-1/2 L and spaced 1-1/4" from center. Weight: 0.46 lbs.
|
|
|
LTI4-5 - 330VAC 60uF Capacitor (ASC)
ASC part number LTI4-5 metallized polypropylene capacitors, rated at 330VAC 60uF +/- 10%. New/Surplus. Approximate dimensions (in inches): 2-3/8 Dia x 2-3/8 L. Leads: center lead is 1-5/8 L. Outer lead is 2-1/2 L and spaced 1" from center. Weight: 0.36 lbs. Large quantity available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
