|
3300I-5020 - 50VDC 20A Programmable Power Supply (Power Ten)
$495.00
Power Ten Inc 50V 20A programmable DC power supply, model number 3300I-5020. Appears new / priced as used because we're unsure. Input voltage: 100-120VAC. Includes IEEE 488.2 interface. To view the full product manual for the 3300-5020 unit (PDF), click here. To view instructions for the IEEE 488.2 programming interface (PDF), click here. Please note that Power Ten is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
|
|
|
|
DCR40-40B2 / M61 - 40VDC 40A Programmable Power Supply (Sorensen) - Used
$695.00
Sorensen 40V 40A DC power supply, model DCR40-40B2 / M61. Used. Input power: 115VAC 26.8A 50/60Hz. These are heavy: 105 lbs! The front panel includes controls for coarse and fine adjustment of both output voltage and current limit. If you require control of the over-voltage protection (OVP) mechanism (a separate feature), please contact the manufacturer for information on how to adjust these units - the front panel OVP control is not included in this model. To view the full product manual for the DCR40-40B 2 unit (PDF ~3.5MB), click here. Please note that Sorensen is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
DCS33-33E M15 - 33V 33A, 1kW programmable power supply (Sorensen) - New / RFE
$995.00
Sorensen / Elgar 33V 33A Programmable 1kW DC Power Supply, model number DCS33-33EM15. These are new/RFE units that were removed from a new custom power assembly (click on title to see detailed pictures). They include an instruction manual but do not include the original box or certificate of conformance. They are in excellent condition and have some very minor marks around the mounting holes because they were previously mounted. Click on the item image to see more detailed pictures and information. To view a full specification sheet for the DCS33-33 EM15 unit (PDF, ~1MB), click here.
|
|
|
DCS33-33E M15 - 33V 33A, 1kW programmable power supply (Sorensen) - Used
$675.00
Sorensen 33V 33A programmable DC power supply, model number DCS33-33EM15. Used. These units are in good condition with some minor scratches around the mounting holes and on a few spots on the cases (see pictures). Input voltage set at 230VAC (user adjustable for 115VAC input). Click on the item image to see more detailed pictures and information. To view a full specification sheet for the DCS33-33 EM15 unit (PDF), click here. Please note that Sorensen is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
DCS50-40M16 - 50V 38A programmable power supply (Sorensen) - New/RFE
$895.00
Sorensen / Elgar 50V 38A Programmable DC Power Supply, model number DCS50-40M16. These are new/RFE units that were removed from a new custom power assembly (click on title to see detailed pictures). These power supplies provide continuous full output power in any volt/amp combination within the rated output voltage and current limits. The front panel features a 10-turn current control knob with a locking shaft, along with a current monitor (100mv/Amp). The voltage (and current) can be monitored and controlled via the "programming, sense, and monitor connector, J3," located on the back of the unit. These units were manufactured in a configuration without front panel meters and no front panel voltage control. Click on the item image to see more pictures and information.
|
|
|
DCS50-40M16 - 50V 38A programmable power supply (Sorensen) - Used
$395.00
Sorensen / Elgar 50V 38A Programmable 2kW DC Switching Power Supply, model number DCS50-40M16 - previously used. These power supplies provide continuous full output power in any volt/amp combination within the rated output voltage and current limits. The front panel features a 10-turn current control knob with a locking shaft, along with a current monitor (100mv/Amp). The voltage (and current) can be monitored and controlled via the "programming, sense, and monitor connector, J3," located on the back of the unit. These units were manufactured in a configuration without front panel meters and no front panel voltage control. Click on the item image to see more detailed pictures and information. To view the full product manual for the DCS50-40 M16 unit (PDF, ~1MB), click here.
|
|
|
DCS55-55 - 55VDC 55A Programmable Power Supply (Sorensen)
$1,095.00
Sorensen 55V 55A variable DC power supply, model number DCS55-55. Used. Input voltage: 200-250VAC, 47-63Hz single or three-phase (output power limited to 2.5kW with single phase input). Comes with connector required to interface with input power plug. To view a full product manual, click here. Please note that Sorensen is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
DCS55-55 M62 - 55V 55A programmable power supply (Sorensen)
$1,075.00
Sorensen / Elgar 55V 55A Programmable 3kW DC Switching Power Supply, model number DCS55-55M62. Used. The DCS Family of programmable power supplies provide continuous full output power in any volt/amp combination within the rated output voltage and current limits. Mountable in a standard 19" equipment rack. Click on the item image to see more detailed pictures and information. To view the full product manual for the DCS55-55 M62 unit (PDF, ~300KB), click here.
|
|
|
DCS55-55-M16 - 55VDC 55A Programmable Power Supply (Sorensen)
$1,095.00
Sorensen 55V 55A programmable DC power supply, model number DCS55-55M16. Used. Input voltage: 200-250VAC, 47-63Hz single or three-phase (output power limited to 2.5kW with single phase input). Comes with connector required to interface with input power plug. To view a full product manual, click here. Please note that Sorensen is now part of the Elgar/Xantrex/Ametek brand.We also have DCS55-55 units available without the M16 option, here.
|
|
|
|
|
HV10-152M - 1kV 1.5mA DC Power Supply (Plastic Capacitors Inc)
$85.00
Plastic Capacitors Inc model HV10-152M high-voltage DC power supply. New/Surplus. Input: 118VAC, 50-500Hz. Output: 1KVDC, 1.5MA. Please read the instruction / specification sheet (PDF ~ 1MB) available here. Additional information is available on the manufacturer's web page at www.plasticcapacitors.com/power.html
|
|
|
HV150-502M - 15kV 5mA DC Power Supply (Plastic Capacitors Inc)
$149.00
High voltage power supply, manufactured by Plastic Capacitors Inc, part number HV150-502M. Previously used. Input rating: 118VAC 50-500Hz. Output rating: 15kVDC 5mA. Approximate dimensions: 4" x 5" x 7". Please read the instruction / specification sheet (PDF ~ 1MB) available here. Additional information is available on the manufacturer's web page at www.plasticcapacitors.com/power.html
|
|
|
|
|
|
|
|
|
P62C-30010 - 300VDC 10A Programmable Power supply (Power Ten)
$1,295.00
Power Ten model P62C-30010 power supply. Used. Variable output up to 300VDC, 10A, 3kW. Input power: 200-240VAC 50/60Hz three phase. One unit remaining in stock. This unit is in very good condition and was repaired at the factory (see detailed photos including repair record). Appears not to have been used since received from factory (envelope with documents is still attached to handle on front panel). To view a full specification sheet (PDF), click here.
|
|
|
|
|
|
|
P63D-12.5800DD - 12.5V 800A Programmable 10kW DC Power Supply (PowerTen)
$1,950.00
Power Ten 12.5V 800A 10kW DC power supply, model P63D-125800DD. Units appear to be new and are in perfect physical condition. However, although they are packaged in manufacturer's boxes, the serial numbers are different than on the box. We are therefore discounting them to be priced as used. Input power: 360-440VAC three-phase, 27-22 Amps, 47-63Hz. To view a full product manual, click here. Please note that Power Ten is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
P83C-100100-BK - 100VDC 100A Programmable Power Supply (PowerTen)
$2,450.00
Power Ten 100V 100A 10kW DC power supply, model P83C-100100BK. Used - this unit was repaired under warranty at the factory and has been stored unused since. Comes as shown in manufacturer's box and packaging, includes certificate of conformance. In very good condition, with only light aesthetic wear. Input power: 190-253VAC three-phase, 50-38 Amps, 47-63Hz. To view a full product manual, click here. Please note that Power Ten is now part of the Elgar/Xantrex/Ametek brand.
|
|
|
PLE24HSZ - 24VDC 10A Power Supply (ETA Electric)
$129.00
ETA Electric model PLE24HSZ power supply. New/Surplus. Input voltage: 85 - 132 or 170 - 264 VAC. Output: 24VDC 10A. RoHS compliant. Also has part number PLE24HSZ1-02 printed on circuit board. To view a full specification sheet, click here.
|
|
|
|
|
|
|
Sorensen DCR40-40B2 Programmable DC power supply, 40V 40A - New / Surplus
$1,195.00
Sorensen model DCR40-40B2 M61 Programmable DC power supply, rated for up to 40VDC 40A, 1.6kW output. These are new / surplus power supplies - most remaining units have minor marks on the case due to prior handling and testing, predominantly on the bottom. They are otherwise shiny and new-looking. Each unit comes with an instruction manual, manufacturer's certificate of conformance, and optional foot pads still in a bag attached to the front. The DCR40-40B 2M61 model features dual panel meters, and automatic crossover between constant voltage (CV) and constant current (CC) modes. Click on the item image to see more detailed pictures and information.
|
|
|
|
|
|
|
|
|
|
|
XT30-2 GPIB,M2 - 30VDC 2A Programmable DC Power Supply (Xantrex)
$395.00
Xantrex model XT30-2 power supply with GPIB interface and 220VAC input (option M2). Variable/programmable output up to 30VDC, 2A. New/Surplus. Manual and Certificate of Conformance are both missing from this unit (only interface manual remains, as pictured).
|
|
