|
001-000039 - 80kV BIL High-Voltage Insulator (Resin Systems Corporation)
$195.00
Resin Systems Corporation high-voltage resin insulator number 001-000039. New/Surplus. Please note: we believe the 80kV BIL stated voltage rating from our supplier to be accurate but we do not have written specifications for these units. Dimensions:
Length: 8 inches total, including 1-1/4 inch at base before ribs begin.
Diameter: Inner dia 4-15/16 inches, outer dia 6-3/4 inches.
Hole spacing: 3 inches center-to-center (along diameter), 31/32" from outer edge (approx 2-1/8" center-to-center length along square border).
Weight: 17 lbs
|
|
|
001-000040 - 100kV BIL High-Voltage Insulator (Resin Systems Corporation)
$275.00
Resin Systems Corporation high-voltage resin insulator number 001-000040. New/Surplus. Please note: we believe the 100kV BIL stated voltage rating from our supplier to be accurate but we do not have written specifications for these units. Dimensions:
Length: 10 inches total, including 1-1/4 inch at base before ribs begin.
Diameter: Inner dia 4-15/16 inches, outer dia 6-3/4 inches.
Hole spacing: 3 inches center-to-center (along diameter), 31/32" from outer edge (approx 2-1/8" center-to-center length along square border).
Weight: 20 lbs
|
|
|
|
|
|
|
|
|
|
|
|
|
8262C14 - Gas/Fluid Valve, 275PSI, 110VAC Coil (Automatic Switch Co.)
$25.00
ASCO Red Hat brand valve model 8262C14. Rated 110-120 volts (coil), 6 Watts, 50/60 Hertz, suitable for air or inert gas at 275 PSI, water at 290 PSI, Lt Oil 130 PSI, 1/8” pipe size, 3/32” orifice size. New/Surplus. To view a full specification sheet (PDF), click here (Note: 'C' is the revision number of this model, now 'G' in the spec sheet). Also see instruction and maintenance manual and engineering information.
|
|
|
|
|
|
|
|
|
|
|
BVO-6116 - Flowmeter and Switch (Kobold)
Please inquire for pricing.
Kobold model BVO-6116 Flowmeter and Switch. New/Surplus. 1.0-5.0 Range GPM Water, 1/2" Fittings NPT, 2.1 Pressure Loss at Max Flow PSIG.
|
|
|
C200HG-CPU43-E - CPU Module (Omron)
$385.00
Omron Industrial Automation PLC CPU unit, model number C200HGCPU43E. New/Surplus. Sticker on box also says: Mecaserto UC-PLC 2 Code 14362 Version V 1.01.1 - this appears to be custom software that was preinstalled (and is replaceable / erasable). Sku # 4-536854-304491. Front panel says: SYSMAC C200HG Programmable Control CPU43.
|
|
|
CLE2T2 - Fan (Comair Rotron)
$49.00
Comair Rotron fan, model CLE2T2. New/Surplus (not in original box - has wiring attached but was never used). 115VAC, 50/60Hz.
|
|
|
|
|
|
|
|
|
|
|
|
|
P71040-3 - pH Controller (Signet)
$395.00
Signet / George Fischer +GF+ Piping Systems model P71040-3 pH Controller. One unit remaing in stock - Appears New, but with tape adhered to outside of case (see pictures).
|
|
|
PTC41 - Clock/Timer Controller (Omega)
$195.00
Omega model PTC41 - Clock/Timer Controller. Appears new / in original box as pictured, but has inventory sticker present (c#3628), so may be lightly used.
|
|
|
R18-03-F000 - Regulator (Wilkerson)
$32.95
Wilkerson model R18-03-F000 modular air line regulator, inlet / outlet NPT 3/8 inch, maximum inlet pressure 300 PSI, maximum temperature 150 degrees F. New/Surplus.
|
|
|
|
|
|
|
|
|
U8262C14 - Gas/Fluid Valve, 150PSI, 24VDC Coil (Automated Switch Co.)
$33.00
ASCO Red Hat brand valve model U8262C14. Rated 24VDC (coil), 9.7 Watts, suitable for air or inert gas at 150 PSI, water at 140 PSI, Lt Oil 145 PSI, 1/8” pipe size, 3/32” orifice size. New/Surplus. To view a full specification sheet (PDF), click here (Notes: Prefix U means open frame construction, 'C' is the revision number of this model - now 'G' in the spec sheet). Also see instruction and maintenance manual and engineering information.
|
|
|
U8262C14 - Gas/Fluid Valve, 275PSI, 240VAC Coil (Automated Switch Co.)
$33.00
ASCO Red Hat brand valve model U8262C14. Rated 240VAC (coil), 6 Watts, suitable for air or inert gas at 275 PSI, water at 290 PSI, Lt Oil 130 PSI, 1/8” pipe size, 3/32” orifice size. New/Surplus. To view a full specification sheet (PDF), click here (Notes: Prefix U means open frame construction, 'C' is the revision number of this model - now 'G' in the spec sheet). Also see instruction and maintenance manual and engineering information.
|
|
|
|
|
|
