Sorensen / Elgar 33V 33A Programmable 1kW DC Power Supply, model number DCS33-33EM15.
These are new/RFE units that were removed from new custom power assemblies (see picture at bottom).
They include an instruction manual but do not include the original box or certificate of conformance.
They are in excellent condition and have some very minor marks around the mounting holes because they were previously mounted.
These units include the option M15 isolated interface,
click here for details (PDF, ~500KB).
Each power supply is pre-wired for 240VAC input.
By adjusting an internal jumper, the supply can be easily rewired to accept 120VAC input.
See product manual for details.
To view a full specification sheet for the DCS33-33 EM15 unit, (PDF, ~1MB),
We also have used/discounted units available here.
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies incorporate current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits.
This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
- Regulation (Line or Load)
- Transient Response:
Typically recovers in <1 ms to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change. 500 µs typical
±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
- Meter Accuracy: 1% of full scale + 1 count
1.75" (44 mm) H x 19" (482 mm) W x 17.5" (444 mm) D
19 lbs. ( 8.62 kg)