Sorensen / Elgar 8V 350A Programmable 3kW DC Switching Power Supply, model number DCS8-350 M85 - Used
(option M85 = Multichannel Slave Interface). We have one unit remaining in stock, tested and working, but in poor physical condition:
There is corrosion on the outside of the case, and the input power connector on the back of this unit is somewhat loose (this has no impact on the proper operation of the unit).
This unit is therefore for sale at a very discounted price - great deal for someone who doesn't mind the physical condition.
To view a full specification sheet for the DCS8-350M85 unit, please visit the manufacturer's web site at www.elgar.com.
Manufacturer's Description:
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies incorporate current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits.
This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
- Input Power:
190-250VAC 14A Three Phase, or 200-250VAC 20A Single Phase (Output power is limited to 2500W for single phase input)
Frequency 47-63Hz
- Regulation (for either a 100% load variation with constant line voltage, or a full input voltage variation over the AC input
voltage range with constant load):
Voltage: 8mV
Current: 350mA
- Voltage Mode Transient Response Time:
1ms recovery to 1% band for 30% step load change from 70% to 100% or 100% to 70%
- Stability (Maximum drift over 8 hours with constant load, line, and temperature, after 90 minute warmup):
Voltage: 4mV
Current: 175mA
- Meter Accuracy:
Voltage: 0.09V
Current: 4.5A
- Output Ripple (RMS): 10mV
- Dimensions:
3.5" H x 19" W x 20" D
- Weight
35 lbs. (approx)
